What You Need to Know About Fall Protection

gate2

Fall protection is all about ensuring that you land softly in the event of a fall. It has been reported that falls are the leading causes of deaths at the workplace and that these fatalities could have been easily prevented. Most falls do occur in the construction industry, however, they aren’t limited to such industries only.

In general, there are thousands of reports every year from companies in different industries reporting a fatal accident an employee has suffered from during a fall. Some of the places where employees fall from include through openings in walls, floors, platforms, through roofs, scaffolds, and ladders. According to OSHA, these incidents are preventable and could have been avoided if the company used basic safeguards including guardrails, fall arrest equipment, and safety harnesses.

Fall training is an essential part of preventing injuries that occur as a result of falls in the companies. Given that an estimated 13,000 deaths every year occur as a result of falls and 68,000 fall-related injuries are treated each year, it is mandatory that the industry guidelines are put in place to prevent costs that would be incurred if these accidents occur.

Prevention is key to any fall protection program and your company should be looking to put in place methods that help prevent falls in the first place. This can only be done by implementing the right infrastructure and training your employees about these safety precautions. Although OSHA by itself provides very little training for these programs, you have to find a company that will help your employees get proper training.

Companies that offer certificates for protection against falls usually have a course outline that encompasses many aspects including the potential hazards and prevention strategies that include mezzanine safety gate. This protection training is designed in a matter that helps your employees get the most out of the training to prevent accidents. It advises on many things including equipment and dressing to the workplace depending on the field of operation.

It is important that employees know and address the need for implementing safety mechanisms that are required. You need to have specific rules in place and clear guidelines that make it possible for your employees to follow the set requirements. Even better, you can choose to go beyond the available guidelines and ensure there is better protection against falls. Training your employees is the most effective method you can avoid falls hence you need to place mechanisms such as loading dock gate to ensure that they enjoy this full training.

Advertisements

What Fall Protection Entails

gate2

Most of the major accidents that happen in a workplace usually arise from employees falling thus resulting to injury and other times, death. For this reason, it is usually recommended that employers set up their work place in order to prevent their employees from falling off from overhead platforms, any holes on the floors and walls as well as falling from workstations that have been elevated. The Occupational Health and Safety Act requires employers to provide fall protection mostly on elevations that are more than four feet above the ground in any given workplace. In shipyards, the fall protection should be provided for an elevation that is above five feet while in the construction industry it should be for elevations above six feet.

Fall protection as per the Occupational Health and Safety Act requires should also be provided to employees working over dangerous equipment and machinery. It does not matter the fall distance because of the working conditions. Personal Protective Equipment should also be provided to employees to keep them safe from any kind of falls. For instance, people working in construction industries should be provided with helmets and even safety belts for their protection.

In order to prevent employees from getting injured as a result of falling, there are several things employers must do such as installation of mezzanine gates. In the case of a hole that an employee may fall and get injured, it should be guarded mainly by use of railing or a floor hole cover. The employer should be the one to provide a guard rail as well as the toe-board around every raised open sided platform., floor or a runway.

Employers should provide to their employees’ safety nets in case they are working in high places, for instance during construction in case one falls off by accident. They should also provide dock safety gates, stair railings, hand rails, safety harness and lines just to keep ensure the safety of their employees. It is a requirement by the Occupational Health and Safety Act for employees to provide working conditions which are free of any dangers employees may face.

Fall protection requires employers to keep floors in the work areas clean as well as dry to avoid slipping. They should also provide the personal protective equipment to their workers without additional or hidden costs. Employees should also be trained about any job hazards in a language that they can understand. If an employer can provide all the above, cases of injuries in the work place are going to be minimized.

Tips To Choosing Sturdy Mezzanine Safety Gates

gate1

If your warehouse or factory has invested in a mezzanine floor, you need to ensure that proper safety precautions are in place. Installing safety dock gates is one way of reducing accidents or incidents associated with falls. If you have the perfect mezzanine safety gates, not only do you keep fatalities at bay, but you also increase productivity. Before you decide to set a budget for these gates, there are several factors you need to consider.

Installing mezzanine safety gates is a matter of compliance. Many buildings and workplaces with mezzanine need to have them fitted. Before the installation, you need to ask why you need to have them and how they will be used. Also, you need to evaluate whether you have had accidents that may have been prevented if these fixtures were in place. Safety gates can be installed to alert workers, or they can be mounted to control access. This means you need to know the safety gate design that is best suited for your application. Remember, not every gate you will find is appropriate and you need to do your homework before the purchase.
It’s advisable that you choose sturdy safety mezzanine gate for your mezzanine platform. They should be sturdy enough to handle loads and prevent objects from tipping over. Apparently, you need to check out the location where you will be mounting the gates. In some areas, the material used to construct these fittings is a major factor. There are places where metal will not do well due to corrosion, and you can pick galvanized steel which is a better option.

Mezzanine safety gates can accommodate one or several persons according to the operations or application they are used for. It’s important that you get the right measurements for the gate if you want your mezzanine opening to be fully covered. Some gates can take up the same form as the railings although they should offer the same sturdiness. If they have to be opened or they are in use most of the time, you need to consider gates with an automated functionality to increase efficiency and save your employees the hassle of hauling manual gates.

Mezzanine safety gates need to comply with set standards and codes. Before you buy a gate, make sure it’s tested such that you know what you are getting for your many. Some cheap gates will not stand the test of time, and you might be forced to place a new order in no time. You need to consult experts who can help you identify the best option for your mezzanine or partner with manufacturers who know what works best for your business or warehouse.